The UK's Trusted
Industrial & Commercial Equipment Store

Show Prices: Inc VAT

Invicta IFJ Fork Mounted Jib

Brand Logo

Fork Mounted Jib

  • Multi hook positioning from 1000-1750 load centres
  • Supplied complete with single swivel hook and bow shackle
  • Maximum fork section 150 x 50 mm at 435 mm centres
  • Zinc plated heel pins for safe attachment to truck
  • Painted bright orange for safety

Please select desired model number for full product specification.

£945.90£1,226.80 Inc. VAT


Invicta IFJ Fork Mounted Jib

Product Description:

When height is not at a premium, but maximum lift capacity is critical, the Fork Mounted Jib allows the movement of long and awkward loads from inaccessible locations with the potential of 4 different lifting centres.


  • Position the forks to the correct distance apart to locate into fork pockets.
  • Remove the heel pins from the attachment.
  • Drive the forks into the fork pockets.
  • Insert fork pocket heel pins directly behind the heel of the fork and attach safety lynch pin into hole provided.
  • Position the swivel hook and shackle to the desired lifting point, ensuring that the shackle is adequately tightened.
  • The attachment is now ready for use.


  • The Fork Mounted Jib should be inspected weekly for general condition with particular attention paid to: A – All weld points, B – Wear and distortion of fork pockets and heel pin attachments, C – Any damaged/worn components, D – General condition of swivel hook, safety latch and shackle
  • Damage or failure must be reported and rectified immediately prior to re-use of the attachment.
  • General surface rusting especially in the critical areas should be treated with proprietary inhibitors, primers and paint on a regular basis.
  • This product is certified for six (6) months from the date of manufacture after which it is the customer’s responsibility to have the product re-tested at an approved testing facility or inspected and logged in a register by a competent person as advised by the HSE.

Health and Safety:

  • The Manager of the department or section where the attachment is to be used must be responsible for ensuring the operators are fully conversant with the attachment, its operation, maintenance and that the heel pins are fitted correctly.
  • Ensure both the truck and attachments are capable of handling the intended load and its contents.
  • Ensure the shackle pins are adequately tightened before each use.
  • Ensure that the heel pins are correctly inserted, retained and positioned in relation to the heel of the fork prior to each and every use.
  • Do not drive into the fork pockets without removing the heel pins.
  • Ensure only vertical lifts are made and not angular lifts when using this attachment.
  • Do not shock load the attachment under any circumstances.
  • The safe working load must not be exceeded at each lifting point.

Product Variations:


  • Capacity (kg) – 1000 at 1000mm load centre
  • Weight (kg) – 141
  • C of G (mm) – 670


  • Capacity (kg) – 1500 at 1000mm load centre
  • Weight (kg) – 146
  • C of G (mm) – 670


  • Capacity (kg) – 2000 at 1000mm load centre
  • Weight (kg) -152
  •  C of G (mm) – 670


  • Capacity (kg) – 3000 at 1000mm load centre
  • Weight (kg) – 159
  •  C of G (mm) – 670


  • Capacity (kg) – 4000 at 1000mm load centre
  • Weight (kg) – 171
  •  C of G (mm) – 670


  • Capacity (kg) – 5000 at 1000mm load centre
  • Weight (kg) – 183
  •  C of G (mm) – 670

Browse Our Full Range Of Handing And Lifting Equipment Here!

Additional information

Product Type

Max Load Capacity

, , , ,


, , , , ,

Centre of Gravity


Load Centre



Model Number

IFJ-1.0-OP, IFJ-1.5-OP, IFJ-2.0-OP, IFJ-3.0-OP, IFJ-4.0-OP, IFJ-5.0-OP



PDFICON IFJ Spec – Branded


There are no reviews yet.

Be the first to review “Invicta IFJ Fork Mounted Jib”