GFC 2R Ornamental Bollard
The GFC 2R Ornamental Mild Steel Bollard from AUTOPA is suitable for a wide range of locations and purposes.
The Ornamental Bollard’s main post is constructed using mild steel, galvanised to ensure its longevity.
Two cast iron rings are welded onto the steel tube to complete the design.
The bollards are available in a galvanised and galvanised and coated finish. RAL numbers must be specified at time of
Eyelets, hooks and chains can be added to these bollards to complete the decorative effect. Please ask for more information.
Installation & Use
- Flanged bollards require bolting down to a suitable concrete surface (no less then 300mm3) by means of three M12 bolts.
- Ragged bollards require a hole of at least 400mm deep for casting into concrete.
- AUTOPA recommends that bollards are placed no further than 1,200mm apart to ensure that no vehicle may pass between them.
- This product is guaranteed for 12 months (if installed and used correctly).
Please note, the following postcodes below may have additional delivery charges – Please Enquire:
AB, BT, DD, DG, GY, HS, IV, JE, KA1-30, KW1-3, KW5-14, IM, PA19-41, PH1-41, PH49-50, PO30-41, TD, TR, IRELAND, ZE
Browse our full range of Barrier Post Systems here.