Motorcycle Locking Loop in Ragged or Flanged

Sale!
Brand Logo

Motorcycle Locking Loop

  • Finished in galvanised mild steel making it ideal for use outside where it will retain it’s looks for years.
  • Providing a very high level of security when used with the motorcyclists own locking chain.
  • Available in Ragged for cast in or Flanged for bolting down.

Flanged:

  • 20mm Tall.
  • 300mm x 220mm (Length x Width)

Ragged:

  • 310mm Tall.
  • 150mm x 150mm (Length x Width)
  • Lid Thickness 6mm, Body Thickness 4mm.

£260.90£299.40 Inc. VAT

Description

Motorcycle Locking Loop

Ragged

The Motorcycle Locking Loop – Cast In is ideal for securing motorcycles. The Loop is cast into the ground providing a very high level of security when used with the motorcyclists own locking chain. The lid is designed so it can be operated with gloves on and when not in use presents no trip hazard (with lid lowered).

The loop is fabricated from 20mm solid galvanised steel bar and is therefore extremely durable. The Motorcycle Locking Loop – Cast In is finished in galvanised mild steel making it ideal for use outside where it will retain it’s looks for years.

 

PN: 138200250

 

Flanged

The Motorcycle Locking Loop – Bolt Down is ideal for securing motorcycles. The Loop is bolted onto the ground providing a very high level of security when used with the motorcyclists own locking chain. The lock loop is designed so it can be operated with gloves on and when not in use presents only a minimal trip hazard (The unit is only 20mm above ground). 4 x high security shear nuts and bolts are supplied for installation.

The loop is fabricated from 20mm solid galvanised steel plate and is therefore extremely strong and durable. The Motorcycle Locking Loop – Bolt Down is finished in galvanised mild steel making it ideal for use outside where it will retain it’s looks for years.

 

PN: 138200260

Installation & use for Ragged

  • Installation requires setting with concrete into a hole of at least 200mm x 200mm x 350mm (length x width x depth)
  • Allow 800-1,000mm between loops and a minimum of 450mm from any obstruction.
  • This product is guaranteed for 12 months (if installed and used correctly).

Installation & use for Flanged

  • Installation requires fixing the plate down to an existing concrete surface with the supplied nuts and bolts.
  • Allow 800-1,000mm between loops and a minimum of 450mm from any obstruction.
  • This product is guaranteed for 12 months (if installed and used correctly).

 

Please note, the following postcodes below may have additional delivery charges – Please Enquire:
AB, BT, DD, DG, GY, HS, IV, JE, KA1-30, KW1-3, KW5-14, IM, PA19-41, PH1-41, PH49-50, PO30-41, TD, TR, IRELAND, ZE

 

Browse our full range of Cycle Parking here.

Additional information

Product Type

Option

,

Finish

Reviews

There are no reviews yet.

Be the first to review “Motorcycle Locking Loop in Ragged or Flanged”
1