The UK's Trusted
Industrial & Commercial Equipment Store

Show Prices: Inc VAT
Exc VAT

Mitre Top Bollard in Stainless Steel or Galvanised

Brand Logo

Mitre Top Bollard

Stainless Steel:

  • Standard finish is brushed stainless steel grade 304.
  • Supplied with 45 degree welded steel cap
  • 2mm wall thickness
  • Diameters: 101mm, 114mm
  • Height: 1000mm
  • Ragged only bollards 400mm below ground
  • Available as Ragged or Flanged

Grade 316 stainless steel available – Please Enquire

Galvanised:

  • 1000mm above ground
  • Ragged only bollards 400mm below ground
  • Diameters: 101mm, 114mm
  • Available as Ragged or Flanged

For Galvanised, it can be colour coated upon request (please specify BS/RAL numbers)

£67.00£139.00 Inc. VAT

Clear
SKU - 194-022 Categories - , Tag

Description

Mitre Top Bollard – Stainless Steel

AUTOPA’s range of Mitre Top Round Stainless Steel Bollards are a simple and elegant way of controlling vehicle parking and access.

Mitre Top Stainless Steel Bollards are the preferred choice for prestigious sites as part of traffic calming measures, pedestrianisation schemes and as a deterrent to ram-raiders.

The complete range of Mitre Top Round Stainless Steel Bollards are available in diameters from 60mm to 204mm in Grade 304 or Grade 316 and available with extended legs for casting into concrete or with a flange plate for bolting down.

 

Installation & Use

  • Concrete In bollards require an excavated hole (no less than 400mm3) for installation.
  • Bolt down Plain Bollards require bolting down to a suitable concrete surface (no less then 400mm3).
  • 48mm – 114mm three M12 bolts, 139mm – 193mm three M16 bolts.
  • Its recommended that bollards are placed no further than 1,200mm apart to ensure that no vehicle may pass between them.
  • This product is guaranteed for 12 months (if installed and used correctly).

 

Mitre Top Bollard – Galvanised

The AUTOPA Mitre Top Bollard has a modern and striking design. Aesthetically pleasing, this simple, elegant bollard is perfect for preventing unauthorised vehicle access or parking in communal areas.

Manufactured from galvanised mild steel, it is designed to look good on even the busiest sites for many years.

Supplied ragged as standard, flanged and colour coated versions are available upon request (please state BS/RAL number at time of order).

 

Installation & Use

  • Ragged bollards require a hole of at least 400mm deep for casting into concrete.
  • Flanged bollards require bolting down to a suitable concrete surface (no less then 300mm3) by means of three M12 bolts.
  • AUTOPA recommends that bollards are placed no further than 1,200mm apart to ensure that no vehicle may pass between them.
  • This product is guaranteed for 12 months (if installed and used correctly).

 

Please note, the following postcodes below may have additional delivery charges – Please Enquire:
AB, BT, DD, DG, GY, HS, IV, JE, KA1-30, KW1-3, KW5-14, IM, PA19-41, PH1-41, PH49-50, PO30-41, TD, TR, IRELAND, ZE

 

Browse our full range of Barrier Post Systems here.

Additional information

Product Type

Finish

,

Diameter Ø

,

Option

,

Thickness

Lead Time

Reviews

There are no reviews yet.

Be the first to review “Mitre Top Bollard in Stainless Steel or Galvanised”