Manual Rising Arm Barrier in 3m to 7m Boom Length

Description

Manual Rising Arm Barrier

The AUTOPA Manual Arm barrier has a slimline design and is suitable for protecting car parks and entrances to commercial property sites.

This Manual Rising Arm Barrier is ideal for areas where access only needs to be restricted during certain times of the day.

The barrier can be locked in the raised and lowered positions offering complete peace of mind when the parking area is not in use.

Manufactured from galvanised mild steel with an aluminium arm, the body of the barrier is coated red as standard.

The Ragged version is 600mm below ground for barrier and 300mm below ground for catch post.

Installation & Use

• Flanged barriers require bolting down onto a suitable concrete surface by means of four M16 bolts.
• Flanged catch posts require bolting down onto a suitable concrete surface by means of four M12 bolts.
• The type of bolt required for botling down is dependent on ground conditions.
• The barrier must be either ragged into or bolted onto a concrete foundation at least 600mm3
• Allow 50-55mm of chipping for drainage.
• The catch post must be either ragged into or bolted onto a concrete foundation at least 300mm3
• Allow 50-55mm of chipping for drainage.
• This product is guaranteed for 12 months (if installed and used correctly).

Accessories and installation parts – Please Enquire

• Double Removable Catch Post
• M16 Expanding Bolt (4 required per barrier)
• M12 Expanding Bolt (4 required per catch post)
• Locking pin

Other Accessories for the Manual Rising Arm Barrier SKU: 194-020

Please note, the following postcodes below may have additional delivery charges – Please Enquire:
AB, BT, DD, DG, GY, HS, IV, JE, KA1-30, KW1-3, KW5-14, IM, PA19-41, PH1-41, PH49-50, PO30-41, TD, TR, IRELAND, ZE

Browse our full range of Barrier Post Systems here.