Invicta IUS Fork Mounted Underslung Scoop – 300kg or 600kg Load Capacity

The Fork Mounted Underslung Scoop is an ideal alternative to a loading shovel allowing your forklift to become a more universal asset.

The design brings the load closer to the Forklift reducing the load centre and in turn making the combined length of scoop and truck shorter, which is a benefit when working in tight spaces.

This Fork Mounted Underslung Scoop is ideal for the movement or loading of loose materials such as sand, gravel, top soil.

Operation

• Position the forks to the correct distance apart to locate into fork pockets.
• Remove the heel pin(s) from the attachment.
• Drive the forks into the fork pockets.
• Insert fork pocket heel pin(s) directly behind the heel of the fork and attach safety lynch pin into hole provided.
• The attachment is now ready for use.

Maintenance

• The Fork Mounted Underslung Scoop should be inspected weekly for general condition with particular attention paid to: A – All weld points, B – Wear and distortion of quick release bottom hangers, C – Any damaged/worn components, D – Alignment of Scoop
• Damage or failure must be reported and rectified immediately prior to re-use of the attachment.
• General surface rusting especially in the critical areas should be treated with proprietary inhibitors, primers and paint on a regular basis.
• This product is certified for six (6) months from the date of manufacture after which it is the customer’s responsibility to have the product re-tested at an approved testing facility or inspected and logged in a register by a competent person as advised by the HSE.

Health & Safety

• The manager of the department or section where the attachment is to be used must be responsible for ensuring the operators are fully conversant with the attachment, its operation, maintenance and that the retaining pins are fitted.
• Ensure both the truck and attachments are capable of handling the intended load and its contents.
• Ensure the heel pins are securely fastened behind the forks before any movement is made.
• Ensure that the Scoop is fully inserted into the load before lifting commences.
• Do not tip load the attachment.
• Do not shock load the attachment under any circumstances.
• The safe working load must not be exceeded.

Optional Features

• Pull Chain c/w Chain Keep for High Level Discharge

Available Options:

• PN: IUS-1 – Load Capacity kg: 300
• PN: IUS-2 – Load Capacity kg: 600